• 8+2 and 12+2 channel frame sizes
• Built-in 24 bit Lexicon digital effects processor
• 32 FX settings
• Tap Tempo and FX setting store function
• 1 FX send on each channel
• 1 configurable auxiliary bus
• XLR-type and ¼” metal jack connector sockets
• RCA phono stereo playback inputs and record outputs
• 3-band EQ with a swept mid on mono inputs
• 3-band EQ on stereo inputs
• TRS insert sockets and inserts on all mono inputs
• Ten-segment LED output metering
• Intuitive and comprehensive solo system
• Headphone output
• Easily rack mountable
• Custom Karaoke preset

The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility.

• Frequency response: Mic / Line input to any output terminal, 20Hz-20KHz ± 0.5dB
• Total harmonic distortion and noise: -30dBu entered into the mix, microphone gain 30dB, <0.007%
• Equivalent input noise microphone inputs: 22Hz-22KHz unweighted, -128dBu (Source resistance 150Ω).
• Bus Noise: 20Hz-20KHz wideband line input terminal load of 150Ω, RMS (RMS) measurements.
• Mix: fader below the maximum mixing level, <- 85dBu
• Crosstalk between channels: Channel mute,> 96dB; fader position (labeled +10),> 96dB;
• Auxiliary send port,> 86dB.
• Input and output impedance: microphone input, 2.4KΩ;
• Line Input, 11KΩ;
• Stereo input, 100KΩ; Output, 75Ω.
• Input and output level: Maximum input level mic / line of + 17dBu;
• The maximum input level of the line is + 30dBu;
• Stereo maximum input level + 30dBu;
• The maximum output level of the mix + 20dBu;
• Headset maximum output level of 300mw / 200Ω.
• EQ (mono input): HF (high frequency): 12KHz ± 15dB;
• MF (MF): 140Hz-3KHz, ± 15dB, Q = 15;
• LF (low frequency); 80Hz, ± 15dB.
• Output Level Meter: L and R mix output level meter for 12 segment LED meter.
• Working conditions: temperature range: -10 ~ + 30 ; relative humidity: 0% to 80%.
• Power supply: integrated light switching power supply; AC input: 85v ~ 270v, 50 / 60Hz.
• Power consumption: less than 20w
• Frequency response: Mic / Line input to any output terminal: (20Hz-20KHz) + 1dB / -3dB
• Total harmonic distortion and noise: <0.007%
• 130dB input to the mixer, microphone gain of 30dB
• Equivalent input noise microphone inputs: 22Hz-22KHz unweighted -128dB (source resistance 150Ω)
• Bus Noise: 20Hz-20KHz wideband line input terminal load of 150Ω, RMS (RMS) measurements
• Mix: fader below the maximum mixing level: <- 85dB
• Crosstalk between channels: Channel mute,> 96dB; fader position (mark +0)> 96dB
• Auxiliary send port:> 86dB
• Input and output impedance: Microphone input: 2.4KΩ
• Mono input: 11KΩ Stereo input: 100KΩ Output: 75Ω
• Input and output level: mic / line of maximum input level: + 17dBu
• Maximum input level line: + 30dBu
• The maximum level stereo inputs: + 30dBu
• The maximum output level of the mix: + 20dBu
• Headset maximum output level: 300mw / 200Ω
• Equalizer: HF (high frequency) 12KHz, ± 15dB, shelving
• MF (IF) 140Hz-3KHz, ± 15dB, Q = 15
• LF (Low Frequency) 80Hz, ± 15dB, shelving
• W * H * D 53.7 * 35 * 7.8 CM
• Weight: 9.6KG

• Mixing capability On-board processors SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
• I/O
• Phantom power +48 V
  Digital I/O USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
• Input Channels
  Mono[MIC/LINE] 8
  Mono/Stereo[MIC/LINE] 2
  Stereo[LINE] 2
• Output Channels
  STEREO OUT 2
  MONITOR OUT 1
  PHONES 1
  AUX SEND 4
  GROUP OUT 4
• Bus Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)
• Input Channel Function
  PAD 26 dB (Mono)
  HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
  COMP 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
  EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
  EQ MID Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking
  EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
  PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping
  Level Meter 2×12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

• Total harmonic distortion 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
• Frequency response +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
• Hum & noise level
  Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
  Residual output noise -102 dBu (STEREO OUT, STEREO master fader: Min)
• Crosstalk -78 dB
• Power requirements AC 100 – 240 V, 50 / 60 Hz
• Power consumption 30 W
• Dimensions
  W 444 mm (17.5″)
  H 130 mm (5.1″)
  D 500 mm (19.7″)
• Net weight 6.8 kg (15.0 lbs.)
• Accessories
  Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Rack-mount kit.
  Optional Accessory: Foot Switch FC5
• Others Operating Temperature: 0 to +40˚C