• 8+2 and 12+2 channel frame sizes
• Built-in 24 bit Lexicon digital effects processor
• 32 FX settings
• Tap Tempo and FX setting store function
• 1 FX send on each channel
• 1 configurable auxiliary bus
• XLR-type and ¼” metal jack connector sockets
• RCA phono stereo playback inputs and record outputs
• 3-band EQ with a swept mid on mono inputs
• 3-band EQ on stereo inputs
• TRS insert sockets and inserts on all mono inputs
• Ten-segment LED output metering
• Intuitive and comprehensive solo system
• Headphone output
• Easily rack mountable
• Custom Karaoke preset

The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility.

• Frequency response: Mic / Line input to any output terminal, 20Hz-20KHz ± 0.5dB
• Total harmonic distortion and noise: -30dBu entered into the mix, microphone gain 30dB, <0.007%
• Equivalent input noise microphone inputs: 22Hz-22KHz unweighted, -128dBu (Source resistance 150Ω).
• Bus Noise: 20Hz-20KHz wideband line input terminal load of 150Ω, RMS (RMS) measurements.
• Mix: fader below the maximum mixing level, <- 85dBu
• Crosstalk between channels: Channel mute,> 96dB; fader position (labeled +10),> 96dB;
• Auxiliary send port,> 86dB.
• Input and output impedance: microphone input, 2.4KΩ;
• Line Input, 11KΩ;
• Stereo input, 100KΩ; Output, 75Ω.
• Input and output level: Maximum input level mic / line of + 17dBu;
• The maximum input level of the line is + 30dBu;
• Stereo maximum input level + 30dBu;
• The maximum output level of the mix + 20dBu;
• Headset maximum output level of 300mw / 200Ω.
• EQ (mono input): HF (high frequency): 12KHz ± 15dB;
• MF (MF): 140Hz-3KHz, ± 15dB, Q = 15;
• LF (low frequency); 80Hz, ± 15dB.
• Output Level Meter: L and R mix output level meter for 12 segment LED meter.
• Working conditions: temperature range: -10 ~ + 30 ; relative humidity: 0% to 80%.
• Power supply: integrated light switching power supply; AC input: 85v ~ 270v, 50 / 60Hz.
• Power consumption: less than 20w
• Frequency response: Mic / Line input to any output terminal: (20Hz-20KHz) + 1dB / -3dB
• Total harmonic distortion and noise: <0.007%
• 130dB input to the mixer, microphone gain of 30dB
• Equivalent input noise microphone inputs: 22Hz-22KHz unweighted -128dB (source resistance 150Ω)
• Bus Noise: 20Hz-20KHz wideband line input terminal load of 150Ω, RMS (RMS) measurements
• Mix: fader below the maximum mixing level: <- 85dB
• Crosstalk between channels: Channel mute,> 96dB; fader position (mark +0)> 96dB
• Auxiliary send port:> 86dB
• Input and output impedance: Microphone input: 2.4KΩ
• Mono input: 11KΩ Stereo input: 100KΩ Output: 75Ω
• Input and output level: mic / line of maximum input level: + 17dBu
• Maximum input level line: + 30dBu
• The maximum level stereo inputs: + 30dBu
• The maximum output level of the mix: + 20dBu
• Headset maximum output level: 300mw / 200Ω
• Equalizer: HF (high frequency) 12KHz, ± 15dB, shelving
• MF (IF) 140Hz-3KHz, ± 15dB, Q = 15
• LF (Low Frequency) 80Hz, ± 15dB, shelving
• W * H * D 53.7 * 35 * 7.8 CM
• Weight: 9.6KG